Category Archives: 25xadjustment

25xAdjustment PIR Sensor 1.8m (6ft) LED T8 25W Tube, Day Light 6000K CCT, 1764mm

25xAdjustment PIR Sensor 1.8m (6ft) LED T8 25W Tube, Day Light 6000K CCT, 1764mm

25xAdjustment PIR Sensor 1.8m (6ft) LED T8 25W Tube, Day Light 6000K CCT, 1764mm

25xAdjustment PIR Sensor 1.8m (6ft) LED T8 25W Tube, Day Light 6000K CCT, 1764mm

TForceLED Adjustable PIR Sensor 180cm (6ft) 25W T8 Tube Light (Isolated Driver, Single Ended), Frosted Cover. TFORCE Lighting Companys newest independently developed PIR Sensor LED Tube. With adjustable delay shut off time and power saving adjustment its suitable for areas such as parking lot, corridors, warehouses, hotels and similar venues. Energy-Efficient & Environmentally Friendly with no hazardous materials like mercury commonly used in fluorescent tubes. It is an ideal lighting solution for areas such as. Through independent R&D we developed our own passive PIR sensor utilizing Japanese Nicera infrared sensor, Fresnel lens, and micro-controller unit (MCU). This internal PIR sensor has time delay- ed action, anti -interference, and more accurate sensing capability. TIME: When user is away from detection zone, light tube will stay on based on the set time. LUX: When user is away from detection zone, the power consumption of the tube will be reduced to the set amount. (0, 10%, 20%, 30%, 40%). LED Tubes end cap is rotatable 90° clockwise and counter clockwise. This can accurately position the tube to the direction of the sensing and lighting area. LED T8 tube lights do not require the use of either a ballast (optional) or starter, allowing you to save even more energy and ensuring longer lifespan. Please simply disconnect or bypass the ballast during installation to install our LED replacements. You should not use an LED tube with an electronic ballast. Remove or bypass the electronic ballast BEFORE installation, to avoid damage to the LED tube. The preheat / starter lamp should be removed when used with an LED tube. For a single tube, the magnetic ballasts do not need to be removed. If the installation has multiple tubes, then the ballast must be removed. For maximum energy saving, it is recommended to always remove the ballast. Before installation, please make sure the power is turned OFF. We recommend when replacing a traditional fluorescent lamp for a LED T8 lamp, the existing control gear should be disconnected and rewiring of the internal circuit maybe required. This should only be carried out by a qualified electrical engineer. Please also note that the PIR motion sensor will NOT work through any solid material such as a plastic or glass diffuser cover. Please choice our Microwave Sensor Tube Light if you want to install in an existing light fitting with diffuser cover. The item “25xAdjustment PIR Sensor 1.8m (6ft) LED T8 25W Tube, Day Light 6000K CCT, 1764mm” is in sale since Friday, July 15, 2016. This item is in the category “Home, Furniture & DIY\Lighting\Light Bulbs”. The seller is “tforce_lighting” and is located in Essex. This item can be shipped worldwide.
  • Type: LED
  • Socket: G13
  • MPN: TF1090
  • Wattage: 25W
  • Brand: tForceLED
  • Energy Efficiency Rating: A+
  • Unit Quantity: 25
  • Input Voltage: AC100-265V/50-60Hz
  • Colour Temperature: 6000K
  • Size: 30*L1800mm
  • Sensor Type: Japanese Nicera infrared sensor (PIR)
  • Length exl. pins: 1764mm
  • Luminous Flux: 2500lm
  • Cover: Frosted
  • Unit Type: Unit
  • Bulb Shape: Tube/Circle
  • Shape: Tube
  • Voltage: 220V