LIGHT OUTPUT – CRUS. SS – Super Saver. LW – Low Wattage. Crossover SuperKits allow you replace many existing recessed canopy fixtures (including LSI, Whiteway and Jet-Phillips) without having to know the dimensions of the existing fixture. SMARTEC ENERGY SAVING FEATURES. THERMAL CONTROL – LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature. HOUSING – Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal. LEDS – Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal). DRIVE CURRENT – Choice of Very Low Wattage (VLW), Low Wattage (LW), or Super Saver (SS). OPTICS / DISTRIBUTION – Symmetrical, which directs light through a glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces. OPTICAL UNIT – Features an ultra-slim 7/8 profile die cast housing, with a standard flat glass lens. Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture. PRESSURE STABILIZING VENT – Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure. DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output. LSI driver components are fully encased in potting for IP65 moisture resistance. Complies with IEC and FCC standards. Surge protected at 10KV. ADAPTOR PANEL – Die formed galvanized steel, with powder coat finish. OPERATING TEMPERATURE – -40°C to 50°C (-40°F to +122°F). ELECTRICAL – Universal voltage power supply, 120-277 VAC, 50/60 HZ input. LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C. FINISH – Standard color is white and is finished with LSIs DuraGrip polyester powder coat process. DuraGrip withstands extreme weather changes without cracking or peeling. EXPECTED LIFE – Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance. LISTING – UL listed to UL 1598, UL 8750 and other U. And International safety standards. Suitable for wet locations. INSTALLATION – One person installation. No additional sealant required. Installs in 12″ or 16″ deck pan. Deck penetration consists of 4 hole, simplifying installation and water sealing. Unit is designed to quickly retrofit into existing Scottsdale (4) hole as well as openings for Encore and Encore Top Access and to reconnect wiring for the SC/ECTA without having to relocate the conduit. Retro panels are available for existing Encores as well as kits for recessed and 2×2 installations. Support brackets are provided standard, to prevent sagging of deck. DIMENSIONS – 15 15/16″ x 15 15/16″. PLEASE CALL IF YOU HAVE ANY QUESTIONS. WE WOULD BE HAPPY TO HELP YOU PLACE YOUR ORDER. WE SELL ALL STYLES OF LSI LED LIGHTS. The item “LSI LED CANOPY LIGHTS CRUS SCOTTSDALE RETROFIT” is in sale since Thursday, April 23, 2015. This item is in the category “Business & Industrial\Construction\Building Materials & Supplies\Lights & Lighting”. The seller is “gseonline” and is located in Pewaukee, Wisconsin. This item can be shipped to United States.
- Type: Canopy fixture
- Light Source: LED – Standard
- Brand: LSI
- Model: CRUS SC LED SS
- Wattage: 114W
- Bulb Color: Cool White
- Color: White
- Country/Region of Manufacture: United States
Comments are closed.