Slim, low profile design. Constructed from rugged die cast and extruded aluminum components. LED driver is mounted in a sealed weathertight center chamber that allows for access from below the luminaire. High performance heat sinks specifically designed for LED parking structure application. Direct mounting bracket is designed to mount directly over existing single gang and octagonal junction boxes for direct mount. 1.5′ (0.5m) of cord is included. Hook and cord mount provided with spring lock hook for mounting and 1.5′ (0.5m) of cord. Pendant mount includes 6′ (1.8m) cord out of the luminaire and is intended to be mounted by 3/4 IP pendant (by others). Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultradurable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver, and white are available. Weight: See Weight Charts on pages 1 and 5 ELECTRICAL SYSTEM. Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 drivers. Power Factor: > 0.9 at full load. Total Harmonic Distortion. Integral 10kV surge suppression protection standard. When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current. 10V Source Current: 0.15mA REGULATORY & VOLUNTARY QUALIFICATIONS. CULus Listed. Suitable for wet locations. Enclosure rated IP66 per IEC 60529. Consult factory for CE Certified products. ANSI C136.2 10kV surge protection, tested in accordance with IEEE/ANSI C62.41.2. Meets FCC Part 15, Subpart B, Class A limits for conducted and radiated emissions. DLC qualified with select SKUs. Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117. Consult factory for additional details.
Comments are closed.