This 160W LED Linear High Bay Light is the perfect energy-efficient indoor lighting solution for industrial, commercial, or residential location with high ceilings, like warehouses, gyms, barns, and supermarkets. The linear footprint is especially ideal for replacing fluorescent high bays that are used to light aisles, lanes, or hallways. This 160W LED High Bay produces 22,400 lumens with an efficacy of 140 lumens per watt in 5000K. Equipped with a dimmable 120-277V LED driver, this UFO high bay light allows you to adjust the brightness over your space and save energy with a 0-10V dimmer. This fixture produces light equivalent to a 1000W Metal Halide high bay saving you up to 70% in energy and last up to 50,000 hours. This LED high bay is constructed with a steel and aluminum body for excellent heat dissipation. Product Dimensions: 23.64″ L x 11.81″ W x 2.89 D. Constant-power emergency drivers with 90-minute run time are available to add on to your LED high bays to increase fire safety and comply with local fire safety codes.
(case of 10) GE 85857 GETR277/120-175W LFL ProLine Magnetic Core & Coil Ballast. LFL ProLine Magnetic Core & Coil Ballast. Case of 10 ballasts. Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity. Internal Auto Reset Thermal Protector Rated 100C. For use on single phase. Non-Isolated Autotransformer designed specifically for lighting applications to step down 277V to 120V. For use with one or more electronic 120V or universal voltage ballasts within max total system power of autotransformer. 277V rms Input, 60Hz Only, 120Vrms Full Load Output. For loads with total system power. 277Vrms Input, 60Hz Only, 120Vrms Full Load Output. Length 9.5 inches; Width 1.7 inches; Height 1.2 inches.
Case of 4 – 2ft x 4ft Backlit Flat Panel – 50W – 6300 Lumens – 5000K. This 2×4 LED Backlit Flat Panel is the perfect replacement for fluorescent troffers used in drop ceilings. Perfect for areas where you need bright, even light such as schools, universities, offices, churches, game rooms and restaurants. This 2×4 LED Backlit Flat Panel is easy to install, just wire the fixture and lift into place in the drop t-grid ceiling. The LED panel weights less and has a more compact design compared to fluorescent troffers which will save you time installing the fixture. The integrated LEDs mean you no longer have to change bulbs as the LEDs will last the life of the fixture. LEDs last 2-3 times longer than old fluorescent tubes and contain no harmful chemicals! Plus LED flat panels do not have a hinged door meaning no more dead bugs or debris in the lens! This LED panel light is 50W at 125 lumens per watt produces 6300 lumens. It come standard with a LED dimmable driver with a 0-10V dimmer. It comes in flicker-free Daylight (5000K). This LED flat panel is also DLC Premium V5.1 listed meaning it is highly energy efficient and may qualify for utility rebates in certain areas. Product Dimensions – 47.72″ W x 23.74″ L x 1.5 H. Constant-power emergency drivers with 90-minute run time are available to add on to your LED panels to increase fire safety and comply with local fire safety codes.
Case of 4 – 1×4 LED Flat Panel Light – Wattage Adjustable 20W/30W/40W – Color Tunable 35K/40K/50K/57K/65K – LumeGen. This 1×4 Wattage Adjustable and Color Tunable LED Backlit Flat Panel is the perfect replacement for fluorescent troffers in new or remodel applications. Designed to fit in a conventional suspended grid ceilings for new construction or retrofit applications. They can be adjusted between 3 different wattages and 5 different color temperatures. LED flat panels will save you both energy and maintenance costs of replacing fluorescent tubes. They are perfect for areas where you need bright, even light such as schools, universities, offices, hospitals, hotels, or any other indoor areas with a drop ceiling. This 1×4 LED Backlit Flat Panel is easy to install, just wire the fixture and lift into place in the drop t-grid ceiling. The LED panel weights less and has a more compact design compared to fluorescent troffers which will save you time installing the fixture. The integrated LEDs mean you no longer have to change bulbs as the LEDs will last the life of the fixture. LEDs last 2-3 times longer than old fluorescent tubes and contain no harmful chemicals! Plus LED flat panels do not have a hinged door meaning no more dead bugs or debris in the lens! This LED panel light is wattage selectable meaning you can select between 20W, 30W, and 40W. At 125 lumens per watt, each wattage provides approximately the following amount of light. 20W = 2500 Lumens. 30W = 3750 Lumens. 40W = 5000 Lumens. In addition to being wattage selectable, this LED panel light is also color tunable allowing you to select between 3500K, 4000K, 5000K, 5700K, and 6500K. With all of the different configurations available in this one light, it is extremely versatile to many different applications or customer preferences. This LED flat panel is also DLC Premium V5.1 listed meaning it is highly energy efficient and may qualify for utility rebates in certain areas. Product Dimensions – 47.72″ W x 11.85″ L x 1.48 H. Constant-power emergency drivers with 90-minute run time are available to add on to your LED panels to increase fire safety and comply with local fire safety codes.
Case of 4 – 2ft x 4ft Backlit Flat Panel – 50W – 6300 Lumens – 4000K. This 2×4 LED Backlit Flat Panel is the perfect replacement for fluorescent troffers used in drop ceilings. Perfect for areas where you need bright, even light such as schools, universities, offices, churches, game rooms and restaurants. This 2×4 LED Backlit Flat Panel is easy to install, just wire the fixture and lift into place in the drop t-grid ceiling. The LED panel weights less and has a more compact design compared to fluorescent troffers which will save you time installing the fixture. The integrated LEDs mean you no longer have to change bulbs as the LEDs will last the life of the fixture. LEDs last 2-3 times longer than old fluorescent tubes and contain no harmful chemicals! Plus LED flat panels do not have a hinged door meaning no more dead bugs or debris in the lens! This LED panel light is 50W at 125 lumens per watt produces 6300 lumens. It come standard with a LED dimmable driver with a 0-10V dimmer. It comes in flicker-free Bright White (4000K). This LED flat panel is also DLC Premium V5.1 listed meaning it is highly energy efficient and may qualify for utility rebates in certain areas. Product Dimensions – 47.72″ W x 23.74″ L x 1.5 H. Constant-power emergency drivers with 90-minute run time are available to add on to your LED panels to increase fire safety and comply with local fire safety codes.
Case of 4 – 2ft x 4ft Backlit Flat Panel – 50W – 6300 Lumens – 3500K. This 2×4 LED Backlit Flat Panel is the perfect replacement for fluorescent troffers used in drop ceilings. Perfect for areas where you need bright, even light such as schools, universities, offices, churches, game rooms and restaurants. This 2×4 LED Backlit Flat Panel is easy to install, just wire the fixture and lift into place in the drop t-grid ceiling. The LED panel weights less and has a more compact design compared to fluorescent troffers which will save you time installing the fixture. The integrated LEDs mean you no longer have to change bulbs as the LEDs will last the life of the fixture. LEDs last 2-3 times longer than old fluorescent tubes and contain no harmful chemicals! Plus LED flat panels do not have a hinged door meaning no more dead bugs or debris in the lens! This LED panel light is 50W at 125 lumens per watt produces 6300 lumens. It come standard with a LED dimmable driver with a 0-10V dimmer. It comes in flicker-free Cool White (3500K). This LED flat panel is also DLC Premium V5.1 listed meaning it is highly energy efficient and may qualify for utility rebates in certain areas. Product Dimensions – 47.72″ W x 23.74″ L x 1.5 H. Constant-power emergency drivers with 90-minute run time are available to add on to your LED panels to increase fire safety and comply with local fire safety codes.
This 110W LED Linear High Bay Light is the perfect energy-efficient indoor lighting solution for industrial, commercial, or residential location with high ceilings, like warehouses, gyms, barns, and supermarkets. The linear footprint is especially ideal for replacing fluorescent high bays that are used to light aisles, lanes, or hallways. This 110W LED High Bay produces 15,400 lumens with an efficacy of 140 lumens per watt in 5000K. Equipped with a dimmable 120-277V LED driver, this UFO high bay light allows you to adjust the brightness over your space and save energy with a 0-10V dimmer. This fixture produces light equivalent to a 400W Metal Halide high bay saving you up to 70% in energy and last up to 50,000 hours. This LED high bay is constructed with a steel and aluminum body for excellent heat dissipation. Product Dimensions: 23.64″ L x 11.81″ W x 2.89 D. Constant-power emergency drivers with 90-minute run time are available to add on to your LED high bays to increase fire safety and comply with local fire safety codes. DLC QPL Code: S-CIP45H.
This 300W LED Linear High Bay Light is the perfect energy-efficient indoor lighting solution for industrial, commercial, or residential location with high ceilings, like warehouses, gyms, barns, and supermarkets. The linear footprint is especially ideal for replacing fluorescent high bays that are used to light aisles, lanes, or hallways. This 300W LED High Bay produces 45,894 lumens with an efficacy of 140 lumens per watt in 5000K. Equipped with a dimmable 120-277V LED driver, this UFO high bay light allows you to adjust the brightness over your space and save energy with a 0-10V dimmer. This fixture produces light equivalent to a 1000W Metal Halide high bay saving you up to 70% in energy and last up to 50,000 hours. This LED high bay is constructed with a steel and aluminum body for excellent heat dissipation. Product Dimensions: 45.67″ L x 14.17″ W x 2.89 D. Constant-power emergency drivers with 90-minute run time are available to add on to your LED high bays to increase fire safety and comply with local fire safety codes.
Convert your old fluorescent strip lights to LED with this wattage adjustable and color tunable 8ft. LED linear strip light. The 3 wattage options and 3 color temperatures provide 9 unique configurations depending on settings packed into this one light meaning you can be confident this light will work in many different settings. This light provides bright even light perfect for rows of lighting in offices, hallways, warehouses, garages, workshops, or any other commercial setting! This versatile LED strip light comes with a dip switch to select between 65W, 75W, and 90W controlling the amount of light the fixture produces. This options allows the light to be configured to multiple ceiling heights or light requirements per room. At 130 lumens per watt, each wattage provides approximately the following amount of light. 65W = 8500 Lumens. 75W = 9800 Lumens. 90W = 11,000 Lumens. In addition to being wattage selectable, this LED strip light is also color tunable allowing you to select between 3500K, 4000K, and 5000K. With all of the different configurations available in this one light, it is extremely versatile to many different applications or customer preferences. This LED strip light is constructed of metal housing with removable K/O plates for easy wiring and end-to-end connections. It has a square polycarbonate frosted shatterproof lens. Product Dimensions – 94.2″ L x 2.8″ W x 3.1 D. DLC QPL Code: S-RWL15E.
Send us a message for larger quantity discounts. This 4ft LED T5 Direct Wire Tube is a perfect pick for any commercial or residential setting. The material of this tube is plastic. This is a direct replacement for a F54T5HO fluorescent tube. Ballast must be bypassed. We offer plenty of wattages and color temperatures, perfect for any environment. Whether you need Single or Double Ended Power, Lightup has you covered. What’s the difference, you ask? Single Ended Power tubes are LED lamps that have neutral and live pins on the same side. These type of tubes require. Single Ended lamps installed by Direct Wire application, do not need a ballast. Doubled Ended Power tubes are LED lamps that live and neutral different sides. These type of tubes can use both. This item is in the category “Business & Industrial\Facility Maintenance & Safety\Facility Lighting\Other Lights & Lighting”. The seller is “online_stores_inc” and is located in this country: US. This item can be shipped to United States.
