Includes controller, power supply, enclosure, and dangles. Controller and power supply mounted and wired in the enclosure. A PixCon16 controller, wired and mounted in enclosure. Appears as, 16 CCB or CCPs on the LOR network. No Pixels or are included! High quality Power Supply with Power Factor Correction and extend temperature operating range. 5V Power Supply – MeanWell RSP-320-5 – Input=120/240V. Enclosure is ventilated to help keep electronics cool. UL Recognized Power Supply. Comes with or without dangles installed. Dangles mate with 5 Volt LOR Pixels/Bulbs/Ribbons. Smart pixel controller includes 16 SPI ports, each capable of driving up to 340 pixels as well as up to four more dedicated DMX-512 ports. The PixCon16 is designed for Light-O-Rama highspeed enhanced networks or E1.31 IP based LANs. What kind of smart pixels can you control? In the world of smart pixels, each LED based RGB pixel is individually controlled and each can be any color of the rainbow. The most popular smart pixels are based on WS2811/12 LEDs but see the specifications below for all the different formats this pixel controller can handle. T have to worry about complicated E1.31 configurations. What can the LOR-PixCon16 handle? Ethernet input compatible with industry standard sACN (E1.31). Onboard E1.31 to DMX512 output capability. Onboard LOR enhanced network to DMX-512 output capability. Supports both Multicast and Unicast addressing. Supports IGMP allowing highly efficient data packet routing in large networks with hundreds of universes. Individually fused outputs and logic circuitry. Wide range voltage input. High current capacity outputs. Configuration free power connection. High power TVS (600W transient peak) providing external ESD protection on DMX interface. Remote temperature and voltage bank monitoring. Firmware upgradable over Ethernet data network. Simple network setup and fast configuration via powerful LOR Network Preferences utility that shows all controllers on the network at once. Advanced configuration options including start universe, start channel, null pixels, zig-zag, reverse pixels, RGB color order, pixel grouping, brightness control and more. Individual outputs with each connector supplying power and data over a single cable. Easy to use screw terminal connectors on all channel outputs and data interfaces. Supports the following pixel protocols (only one type at a time per controller). 16 SPI ports, each capable of addressing up to 340 pixels. 16 SPI ports, each protected by 4A mini blade fuse (can be changed up to 7.5A). Up to four standard DMX-512 universe outputs (providing an E1.31 to DMX-512 bridge) via dedicated RJ45 connectors. Jumper links allowing selection between? Wiring on dedicated DMX-512 ports. Two split power banks allowing simultaneous support of two different pixel voltages (rated at 32A each for total current capacity of 64A). Auxiliary output allows PWM control of an external fan for automatic temperature regulation inside an enclosure. Four layer PCB with high six ounce copper density to handle large currents and minimize voltage drop. Controller board only and does not include enclosure or power supply(s). The item “Light-o-Rama PixCon 16-SPI-Port Assembled Controller Christmas Lights” is in sale since Thursday, November 18, 2021. This item is in the category “Collectibles\Holiday & Seasonal\Lights”. The seller is “dpa-it” and is located in Union City, Tennessee. This item can be shipped to United States.
- Sensor Type: Light
- Type: Controller
- Occasion: Christmas
- Brand: Light-O-Rama
