100 Retrofit Kit Brackets 8′ 2 Bulb T12 Light Strip Conversion To T8 4′ Tube LED. This is for 100 plates only! (100) Lamp Holder Bracket/Plate Only! 100 of Retrofit Kit Plate for your 8′ T12 strip to 4 or 2 lamp 8 foot strip. Lamp Holders & Sockets. Looking for more than we have listed? We can get more. We have normal and high ballast factor available. Ballast is available, but is NOT included with this kit.

For sale is the second 300mm tower beacon conversion that I’ve created. It’s a Hughey & Phillips KG-114, probably the standard of the industry for a long time, nowadays becoming obsolete, being replaced with much lighter, smaller and more energy-efficient strobe or LED types. These beacons normally require two special 620-watt incandescent bulbs that each have a 1/4-turn. Locking, “prefocus” mogul base. I’ve fabricated two adaptors that will allow the owner to install any kind of medium-base screw-in bulb instead. The unit comes with two large vintage-look LED bulbs with the appearance of having large helical filaments, approximating the look of the original bulbs while using only 1% of the power. In line with the heavy-duty grounded 9-ft power cord is a high-power dimmer capable of. I’m not including the original style of bulb as few buyers would be interested in those power hogs, but I include information on where to order a pair for real cheap if you’re interested. I installed 1″ thick rubber “shoes under the four feet, shaped to the feet contours. Being that the beacon glass is for industrial and not decorative use, it has the typical factory imperfections such as surface ripples and wrinkles, prominent mold lines and such. It’s almost always inevitable that these beacons suffer some degree of damage from being put into service and removed again, and this one is typical. There are a number of chipped edges, although I’ve been able to fill in the worst ones with windshield repair resin to make them less noticeable. The unit has been thoroughly cleaned inside and out and all the metal surfaces have been wire brushed with a fine bristle Dremel attachment. The photos of the beacon illuminated show the brightest part as fading to white. This is a camera anomaly only, the true color you see will always be a pure red. The item “WAY COOL 300mm H&P TOWER BEACON LED CONVERSION withDIMMER MAN CAVE LIGHT” is in sale since Tuesday, November 17, 2020. This item is in the category “Business & Industrial\Facility Maintenance & Safety\Facility Lighting\Other Lights & Lighting”. The seller is “lenzb” and is located in El Centro, California. This item can be shipped to United States.

• Brand: Hughey & Phillips

Quickly and easily retro-fit your old 8 foot 2 lamp T12 fluorescent lamp strip fixtures to 4 lamp or 2 lamp F32T8 fluorescent strip fixtures with our Retrobracket combo. Combo comes with the Retrobracket, a 4 lamp 32 watt 120/277 volt electronic ballast, and fastening screws. If you need less than 20 kits send us a note and we will post the quantity that you need. The item “(20) Retrofit Lighting, 4L T8 Retrobracket Combo with Ballast Conversion Kit” is in sale since Wednesday, April 3, 2019. This item is in the category “Business & Industrial\Building Materials & Supplies\Lights & Lighting\Other Lights & Lighting”. The seller is “us2015.labou” and is located in Amherst, New Hampshire. This item can be shipped to United States, Mexico, Canada.

• Modified Item: No
• Custom Bundle: No
• Non-Domestic Product: No

I have 10 used 20′ tall parking lot light poles with dual heads available. These poles are rated for dual heads, included are dual heads measuring 11′ wide. The light buckets are 22″ x 28″ and have metal halide 1000 watt ballast / bulbs in them now. These bucket housings can be removed and LED head installed to update / retrofit the heads if desired. I also have single head units available in another listing. They are disassembled as seen in pictures and ready to transport to your location. I will help with loading. Please arrange otherwise if needed before purchasing. Located in London KY near I 75 exit 41. The item “20 Foot Parking Lot Light Pole dual head used ready for pick up LED conversion” is in sale since Thursday, February 27, 2020. This item is in the category “Business & Industrial\Building Materials & Supplies\Lights & Lighting\Other Lights & Lighting”. The seller is “yikityak” and is located in London, Kentucky. This item can’t be shipped, the buyer must pick up the item.

• MPN: Does Not Apply
• Country/Region of Manufacture: Unknown
• Brand: Unbranded

For sale here is a new-in-the-box “Light Tower Solutions” LED Retrofit Kit #LEXIN 300…. Designed to replace costly Metal Halide lamps on your light tower. A Metal Halide, 4 lamp light tower costs a little over twice as much to operate as it does to operate with LED. An LED equipped tower running for the same length of time will consume roughly 85 gallons of diesel…. In addition, with the LED lighting, there are not bulbs or capacitors to replace and no associated labor costs. Furthermore, with LED lights, you free up power to be used for other activities requiring electrical power. Each LED lamp consumes 320 watts and produces 31,990 lumens. Metal Halide Benefits: Significant fuel savings, brighter white light, Safer 36V LED vs 600V Metal Halide, Frees up generator power, Instant on/off, No color degradation, No light pollution and LED is environmentally friendly. Calculate your own saving by filling in the blanks below. Item is located at ACME EQUIPMENT 3401 Gateway Drive, Grand Forks, ND 58203. The item “LED LIGHT TOWER CONVERSION KIT #LEXIN300″ is in sale since Tuesday, March 19, 2019. This item is in the category “Business & Industrial\Building Materials & Supplies\Lights & Lighting\Other Lights & Lighting”. The seller is “acme_equipment” and is located in Grand Forks, North Dakota. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Light Tower Solutions

100 Retrofit Kit Brackets 8′ 2 Bulb T12 Light Strip Conversion To T8 4 Tube LED. This is for 100 plates only! (100) Lamp Holder Bracket/Plate Only! 100 of Retrofit Kit Plate for your 8 T12 strip to 4 or 2 lamp 8 foot strip. Lamp Holders & Sockets. Looking for more than we have listed? We can get more. We have normal and high ballast factor available. Ballast is available, but is NOT included with this kit. The item “100 Retrofit Kit Brackets 8′ 2 Bulb T12 Light Strip Conversion To T8 4 Tube LED” is in sale since Thursday, September 21, 2017. This item is in the category “Business & Industrial\Construction\Building Materials & Supplies\Lights & Lighting”. The seller is “lightsourcecentral” and is located in Dorchester, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Light Source: Retrofit Kit
• Model: Does Not Apply
• Country/Region of Manufacture: United States
• Wattage: Does Not Apply
• Bulb Color: Does Not Apply
• Type: RETROFIT KIT
• Color: White
• MPN: Does Not Apply
• Brand: ENERGY SOLUTIONS INTERNATIONAL

Pre-wired Retrofit Conversion Kit for 8′ 2 Bulb T12 Light Strip To 4′ T8 4 Lamp. > Wired for One side Power LED Tubes. 40 Pre-wired Non-Shunted Lamp Holders. 40 Non-Shunted Lamp Holders. The item “10 Pre-wired Retrofit Conversion Kit for 8′ 2Bulb T12 Light Strip To 4′ T8 4Lamp” is in sale since Wednesday, December 06, 2017. This item is in the category “Business & Industrial\Construction\Building Materials & Supplies\Lights & Lighting”. The seller is “greenlightmd-1″ and is located in Gastonia, North Carolina. This item can be shipped to United States.

• Brand: Greenlight Express
• Type: Light Fixture
• Light Source: Retrofit Kit
• MPN: Does Not Apply

Quickly and easily retro-fit your old 8 foot 2 lamp T12 fluorescent lamp strip fixtures to 4 lamp F32T8 fluorescent strip fixtures with our Retrobracket combo. Combo comes with the Retrobracket, a 4 lamp 32 watt 120/277 volt electronic ballast, and fastening screws. The item “(20) Retrofit Lighting, 4L T8 Retrobracket Combo with Ballast Conversion Kit” is in sale since Monday, March 06, 2017. This item is in the category “Business & Industrial\Construction\Building Materials & Supplies\Lights & Lighting”. The seller is “lightingoutlet” and is located in Burnsville, Minnesota. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, IL, to Mexico, to New Zealand, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, CL, CO, CR, PA, TT, GT, HN, JM.