Tag Archives: grafik

Lutron GRX-4M-GC Grafik Eye 3000/4000 4Motor Group Controller, 110-127VAC 20A

Lutron GRX-4M-GC Grafik Eye 3000/4000 4Motor Group Controller, 110-127VAC 20A

Lutron GRX-4M-GC Grafik Eye 3000/4000 4Motor Group Controller, 110-127VAC 20A

Lutron GRX-4M-GC Grafik Eye 3000/4000 4Motor Group Controller, 110-127VAC 20A

Lutron GRX-4M-GC Grafik Eye 3000/4000 4Motor Group Controller, 110-127VAC 20A

Lutron GRX-4M-GC Grafik Eye 3000/4000 4Motor Group Controller. Single Phase, Bi-directional motor. 5A 1/4HP per channel at 120VAC. For use with GRAFIK Eye 3500 and 4500. 4-channel AC motor controller that integrates. Seamlessly with GRAFIK Eye 3000 and 4000. GRAFIK Eye communication link with no. Provides capability to incorporate AC. Motorized window treatments or projection. Screens into lighting scenes. Can control AC motorized window treatments. Independently of lighting scenes. Provides dry contact closure inputs for. Control by low voltage, dry contact closure. Devices, such as RadioTouch controllers. Keypads, and building management systems. 8 Group Controllers may be connected. To the GRAFIK Eye control link. Are in addition to the. 8 control units and 16. Accessory controls that may be connected. For commercial use, Class A only. 110-127 V, 50-60 Hz. 20A total input current. 5 A, ¼ HP motor load per channel at 120 V. Do not wire motors in parallel. Wires directly into the GRAFIK Eye control link. Provides Open, Close, and Stop terminals for contact. Accepts either momentary or maintained contact closure. Inputs, configurable by a DIP switch. Select which motor lead is up and down by setting a. Stop function may also be accomplished by applying. Open and Close inputs simultaneously. Provides local override buttons that activate motor. Outputs to test the system. Provides LED indication of last position of AC window. Treatments (Open, Close, Stop). Metal enclosure provides separate wiring compartments. For line voltage and low voltage. Weight: 6.7 lbs. 32°F (0°C) to 104°F (40°C) operating temperature range. Less than 90% relative humidity, non-condensing.

New Lutron Grafik Eye QSE-CI-DMX Control Interface

New Lutron Grafik Eye QSE-CI-DMX Control Interface

New Lutron Grafik Eye QSE-CI-DMX Control Interface

New Lutron Grafik Eye QSE-CI-DMX Control Interface

New Lutron Grafik Eye QSE-CI-DMX Control Interface

Brand new, never used.

Lutron QSGRJ-4P-TWH GRAFIK Eye QS Wireless Controller Used No Face Plate

Lutron QSGRJ-4P-TWH GRAFIK Eye QS Wireless Controller Used No Face Plate

Lutron QSGRJ-4P-TWH GRAFIK Eye QS Wireless Controller Used No Face Plate

Lutron QSGRJ-4P-TWH GRAFIK Eye QS Wireless Controller Used No Face Plate

Lutron QSGRJ-4P-TWH GRAFIK Eye QS Wireless Controller Used No Face Plate

Lutron QSGRJ-4P-TWH GRAFIK Eye QS Wireless Controller Used No Face Plate

This Lutron QSGRJ-4P-TWH GRAFIK Eye QS Wireless Controller in gently used condition. Please note that a face plate is not included with this item.

Lutron PHPM-3F-DV-WH Grafik Eye GRX3000/4000/QS Free Shipping Each

Lutron PHPM-3F-DV-WH Grafik Eye GRX3000/4000/QS Free Shipping Each

Lutron PHPM-3F-DV-WH Grafik Eye GRX3000/4000/QS Free Shipping Each

Lutron PHPM-3F-DV-WH Grafik Eye GRX3000/4000/QS Free Shipping Each

Lutron PHPM-3F-DV-WH Grafik Eye GRX3000/4000/QS Free Shipping Each

Enhance the ambiance of your workplace with this Lutron PHPM-3F-DV-WH Grafik Eye GRX3000/4000/QS. This lighting fixture comes in a sleek white color, adding a sophisticated touch to your facility. Made by trusted brand Lutron, this product promises high-quality performance and functionality.

Lutron QSE-IO Control Interface for QS Grafik Eye, Contact Closure Interface

Lutron QSE-IO Control Interface for QS Grafik Eye, Contact Closure Interface

Lutron QSE-IO Control Interface for QS Grafik Eye, Contact Closure Interface

Lutron QSE-IO Control Interface for QS Grafik Eye, Contact Closure Interface. This item is in the category “Business & Industrial\Facility Maintenance & Safety\Facility Lighting\Other Lights & Lighting”. The seller is “chriscomm” and is located in this country: US. This item can be shipped to United States.
  • Brand: Lutron

Lutron QSE-IO Control Interface For QS Grafik Eye. Contact Closure Interface

Lutron QSE-IO Control Interface For QS Grafik Eye. Contact Closure Interface

Lutron QSE-IO Control Interface For QS Grafik Eye. The item “Lutron QSE-IO Control Interface For QS Grafik Eye. Contact Closure Interface” is in sale since Friday, June 26, 2020. This item is in the category “Business & Industrial\Facility Maintenance & Safety\Facility Lighting\Other Lights & Lighting”. The seller is “mike3220″ and is located in Allentown, Pennsylvania. This item can be shipped to United States.
  • Brand: Lutron
  • MPN: Does Not Apply

Lutron GRAFIK Eye Centralized Lighting Control Network Interface EM-NWK-E-D-1

Lutron GRAFIK Eye Centralized Lighting Control Network Interface EM-NWK-E-D-1

Lutron GRAFIK Eye Centralized Lighting Control Network Interface EM-NWK-E-D-1

Lutron GRAFIK Eye Centralized Lighting Control Network Interface EM-NWK-E-D-1

Lutron GRAFIK Eye Centralized Lighting Control Network Interface EM-NWK-E-D-1

Lutron GRAFIK Eye Centralized Lighting Control Network Interface EM-NWK-E-D-1

Lutron GRAFIK Eye Centralized Lighting Control Network Interface EM-NWK-E-D-1. Please do not just send an item back because we do assign return IDs. This will avoid us opening an unpaid item case. Please see the hours of operation below to see what the cutoff time is for getting a package out. Feedback will be left for buyers at the end of each week (Friday) for that week of sales. We are more than happy to help you try to resolve any issues you have. PROBLEMS WITH YOUR ITEM. Monday-Friday: 7:00AM 7:00PM EST. We will try to answer messages as quickly as possible and are not holding ourselves specifically to these hours, but these are just some general guidelines. We sell a large selection of new, surplus and used items. Our #1 goal is to offer a wide variety of merchandise at a reasonable price! IMPORTANT: ALL LISTINGS COME ONLY WITH WHAT IS SHOWN IN PHOTOS. IF YOU DO NOT SEE AN ACCESSORY, POWER CORD, OR ANY PART ASSOCIATED WITH THIS ITEM IN THE PHOTOS, IT DOES NOT COME WITH THE ITEM UNLESS OTHERWISE STATED. The item “Lutron GRAFIK Eye Centralized Lighting Control Network Interface EM-NWK-E-D-1″ is in sale since Monday, September 17, 2018. This item is in the category “Business & Industrial\Facility Maintenance & Safety\Facility Lighting\Other Lights & Lighting”. The seller is “ubargain” and is located in Powhatan, Virginia. This item can be shipped to United States, Canada, United Kingdom, China, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Ukraine, Cayman islands.
  • MPN: EM-NWK-E-D-1
  • Brand: Lutron
  • Model: 5002280

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCC

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCC

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCC

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCC

Listing Condition as Used even though Look and Operate Like New. LUTRON QSGR-6P-WH GRAFIK Eye QS 6-zone Control Unit with line voltage dimming. Serial Number 01E3 4BCC SM-Z46. GRAFIK Eye QS is the premier energy-saving lightand shade control. The GRAFIK Eye QS control unitincludes an astronomic timeclock, intuitive lightingpresets, and direct shade control. Additionally, theGRAFIK Eye QS control unit is compatible with allLutron wired QS products and systems, includingQuantum systems. Fits into a 4-gang U. Backbox, 3` in (90.4 mm) deep (Lutron P/N 245-254) or3 in (76.2 mm) deep (Lutron P/N 241-400). Pushbutton recall of four preset lighting scenes, plus Off. Sixteen (16) total available scenes, plus Off scene. Zones can control many light source types directly. Or through power modules. Optional integrated shade control buttons, which. Can also be added to the unit after installation. Master override buttons to raise and lower all lights. Allows setup of lighting scenes and shade presets. Using buttons on the control unit. Built-in infrared (IR) receiver. Info screen shows zone light level percentage. Energy savings, zone labeling, and programming. Lockout option prevents accidental changes. Occupancy sensor input and 24 V- power for one. QS communication link for seamless integration of. Lights, motorized window treatments, occupancy. Sensors, wallstations, and integration interfaces. Compatible with all Lutron QS system components. Backlit buttons with engraving make unit easy to. Available in a variety of colors and finishes. 120127 V 50/60 Hz. 220240 V 50/60 Hz. CULus CEC (Title 24). 32 to 104 °F (0 to 40 °C). Relative humidity less than 90% non-condensing. Zones on Energi Savr Node products wired to the sameQS link. Zones on Energi Savr Node with Softswitch Zones on Energi Savr Node for 010 V Zones on Energi Savr Node with EcoSystemPlease refer to Remote Zone Mapping forimportant information. DMX channel(s) through DMX output interface(QSE-CI-DMX). Please refer to Accessory Controls: DMXOutput Interface. Controls the following lighting sources with a smooth, continuous square law dimming curve or on a fullconduction non-dim basis. Lutron Tu-Wire electronic fluorescent dimming ballast. Lutron Hi-lume 2-wire LTE LED driver. Advance Mark 10R electronic dimming ballast. Neon and cold cathode. Non-dim incandescent, magnetic low-voltage, Tu-Wire. Cree LR4/6, 120 V fixtures for loading capacities. Controls the following lighting sources with a smooth, continuous square law dimming curve or on a fullconduction non-dim basis through separate Lutron powerinterfaces. Electronic low-voltage transformers (use ELV orPhase-Adaptive power module: PHPM-PA-DV-WH/PHPM-PA-120-WH). Lutron 3-wire controlled electronic fluorescent dimmingballasts (use fluorescent 3-wire power module:PHPM-3F-DV-WH / PHPM-3F-120-WH). Lutron 3-wire controlled LED drivers (use flourescent3-wire power module: PHPM-3F-DV-WH/PHPM-3F-120-WH). Non-dim (use switching module: PHPM-SW-DV-WH). 010 V (use TVI). Note: A zone may be programmed to control only oneload type at a time. Lightning strike protection meets ANSI/IEEE standard62.41-1980. Can withstand voltage surges of up to6000 V and current surges of up to 3000 A. Tested to withstand 16 kV electrostatic discharge withoutdamage or memory loss. RTISS-equipped: Compensates in real time for incomingline voltage variations (no visible flicker with +/-2%change in RMS voltage per cycle, and +/-2% Hz changein frequency per second). Power failure memory retains programming and light levelsettings for up to 10 years in the event of a power loss. The GRAFIK Eye QS control unit supplies 3 Power DrawUnits (PDUs) on the QS link. Faceplate is hinged at the top and bottom, and staysopen at 180° for ease of access. Scene and Shade Buttons. Large, rounded buttons are easy to use. Backlit buttons with optional engraving make it easy to. Find and to operate the control unit in low light conditions. (backlight can be disabled). Optional button engraving is angled up to the eye for. Predefined label stickers are included for field labeling. 4 preset lighting scenes, plus Off, are accessible from the. Front of the control unit. 12 additional scenes are stored in the control unit and. Are accessible from the integral timeclock, seeTouch QS. Wallstations, and QS interfaces. Light levels fade smoothly between scenes. Can be set differently for each scene: 0 to 59 seconds, or1 to 60 minutes. Maximum fade time from Scene Off is 3 seconds. The item “LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCC” is in sale since Tuesday, April 13, 2021. This item is in the category “Business & Industrial\Facility Maintenance & Safety\Facility Lighting\Other Lights & Lighting”. The seller is “topav1997″ and is located in Indio, California. This item can be shipped worldwide.
  • MPN: QSGR-6P
  • Brand: Lutron

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA

Listing Condition as Used even though Look and Operate Like New. LUTRON QSGR-6P-WH GRAFIK Eye QS 6-zone Control Unit with line voltage dimming. Serial Number 01E3 4BCA SM-Z46. GRAFIK Eye QS is the premier energy-saving light and shade control. The GRAFIK Eye QS control unit includes an astronomic time clock, intuitive lighting presets, and direct shade control. Additionally, theGRAFIK Eye QS control unit is compatible with all Lutron wired QS products and systems, includingQuantum systems. Fits into a 4-gang U. Backbox, 3` in (90.4 mm) deep (Lutron P/N 245-254) or3 in (76.2 mm) deep (Lutron P/N 241-400). Pushbutton recall of four preset lighting scenes, plus Off. Sixteen (16) total available scenes, plus Off scene. Zones can control many light source types directly. Or through power modules. Optional integrated shade control buttons, which. Can also be added to the unit after installation. Master override buttons to raise and lower all lights. Allows setup of lighting scenes and shade presets. Using buttons on the control unit. Built-in infrared (IR) receiver. Info screen shows zone light level percentage. Energy savings, zone labeling, and programming. Lockout option prevents accidental changes. Occupancy sensor input and 24 V- power for one. QS communication link for seamless integration of. Lights, motorized window treatments, occupancy. Sensors, wallstations, and integration interfaces. Compatible with all Lutron QS system components. Backlit buttons with engraving make unit easy to. Available in a variety of colors and finishes. 120127 V 50/60 Hz. 220240 V 50/60 Hz. CULus CEC (Title 24). 32 to 104 °F (0 to 40 °C). Relative humidity less than 90% non-condensing. Zones on Energi Savr Node products wired to the sameQS link. Zones on Energi Savr Node with Softswitch Zones on Energi Savr Node for 010 V Zones on Energi Savr Node with EcoSystemPlease refer to Remote Zone Mapping forimportant information. DMX channel(s) through DMX output interface(QSE-CI-DMX). Please refer to Accessory Controls: DMXOutput Interface. Controls the following lighting sources with a smooth, continuous square law dimming curve or on a fullconduction non-dim basis. Lutron Tu-Wire electronic fluorescent dimming ballast. Lutron Hi-lume 2-wire LTE LED driver. Advance Mark 10R electronic dimming ballast. Neon and cold cathode. Non-dim incandescent, magnetic low-voltage, Tu-Wire. Cree LR4/6, 120 V fixtures for loading capacities. Controls the following lighting sources with a smooth, continuous square law dimming curve or on a fullconduction non-dim basis through separate Lutron powerinterfaces. Electronic low-voltage transformers (use ELV orPhase-Adaptive power module: PHPM-PA-DV-WH/PHPM-PA-120-WH). Lutron 3-wire controlled electronic fluorescent dimmingballasts (use fluorescent 3-wire power module:PHPM-3F-DV-WH / PHPM-3F-120-WH). Lutron 3-wire controlled LED drivers (use flourescent3-wire power module: PHPM-3F-DV-WH/PHPM-3F-120-WH). Non-dim (use switching module: PHPM-SW-DV-WH). 010 V (use TVI). Note: A zone may be programmed to control only oneload type at a time. Lightning strike protection meets ANSI/IEEE standard62.41-1980. Can withstand voltage surges of up to6000 V and current surges of up to 3000 A. Tested to withstand 16 kV electrostatic discharge withoutdamage or memory loss. RTISS-equipped: Compensates in real time for incomingline voltage variations (no visible flicker with +/-2%change in RMS voltage per cycle, and +/-2% Hz changein frequency per second). Power failure memory retains programming and light levelsettings for up to 10 years in the event of a power loss. The GRAFIK Eye QS control unit supplies 3 Power DrawUnits (PDUs) on the QS link. Faceplate is hinged at the top and bottom, and staysopen at 180° for ease of access. Scene and Shade Buttons. Large, rounded buttons are easy to use. Backlit buttons with optional engraving make it easy to. Find and to operate the control unit in low light conditions. (backlight can be disabled). Optional button engraving is angled up to the eye for. Predefined label stickers are included for field labeling. 4 preset lighting scenes, plus Off, are accessible from the. Front of the control unit. 12 additional scenes are stored in the control unit and. Are accessible from the integral timeclock, seeTouch QS. Wallstations, and QS interfaces. Light levels fade smoothly between scenes. Can be set differently for each scene: 0 to 59 seconds, or1 to 60 minutes. Maximum fade time from Scene Off is 3 seconds. The item “LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA” is in sale since Tuesday, April 13, 2021. This item is in the category “Business & Industrial\Facility Maintenance & Safety\Facility Lighting\Other Lights & Lighting”. The seller is “topav1997″ and is located in Indio, California. This item can be shipped worldwide.
  • MPN: QSGR-6P
  • Brand: Lutron

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA

LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA

Listing Condition as Used even though Look and Operate Like New. LUTRON QSGR-6P-WH GRAFIK Eye QS 6-zone Control Unit with line voltage dimming. Serial Number 01E3 4BCA SM-Z46. GRAFIK Eye QS is the premier energy-saving lightand shade control. The GRAFIK Eye QS control unitincludes an astronomic timeclock, intuitive lightingpresets, and direct shade control. Additionally, theGRAFIK Eye QS control unit is compatible with allLutron wired QS products and systems, includingQuantum systems. Fits into a 4-gang U. Backbox, 3` in (90.4 mm) deep (Lutron P/N 245-254) or3 in (76.2 mm) deep (Lutron P/N 241-400). Pushbutton recall of four preset lighting scenes, plus Off. Sixteen (16) total available scenes, plus Off scene. Zones can control many light source types directly. Or through power modules. Optional integrated shade control buttons, which. Can also be added to the unit after installation. Master override buttons to raise and lower all lights. Allows setup of lighting scenes and shade presets. Using buttons on the control unit. Built-in infrared (IR) receiver. Info screen shows zone light level percentage. Energy savings, zone labeling, and programming. Lockout option prevents accidental changes. Occupancy sensor input and 24 V- power for one. QS communication link for seamless integration of. Lights, motorized window treatments, occupancy. Sensors, wallstations, and integration interfaces. Compatible with all Lutron QS system components. Backlit buttons with engraving make unit easy to. Available in a variety of colors and finishes. 120127 V 50/60 Hz. 220240 V 50/60 Hz. CULus CEC (Title 24). 32 to 104 °F (0 to 40 °C). Relative humidity less than 90% non-condensing. Zones on Energi Savr Node products wired to the sameQS link. Zones on Energi Savr Node with Softswitch Zones on Energi Savr Node for 010 V Zones on Energi Savr Node with EcoSystemPlease refer to Remote Zone Mapping forimportant information. DMX channel(s) through DMX output interface(QSE-CI-DMX). Please refer to Accessory Controls: DMXOutput Interface. Controls the following lighting sources with a smooth, continuous square law dimming curve or on a fullconduction non-dim basis. Lutron Tu-Wire electronic fluorescent dimming ballast. Lutron Hi-lume 2-wire LTE LED driver. Advance Mark 10R electronic dimming ballast. Neon and cold cathode. Non-dim incandescent, magnetic low-voltage, Tu-Wire. Cree LR4/6, 120 V fixtures for loading capacities. Controls the following lighting sources with a smooth, continuous square law dimming curve or on a fullconduction non-dim basis through separate Lutron powerinterfaces. Electronic low-voltage transformers (use ELV orPhase-Adaptive power module: PHPM-PA-DV-WH/PHPM-PA-120-WH). Lutron 3-wire controlled electronic fluorescent dimmingballasts (use fluorescent 3-wire power module:PHPM-3F-DV-WH / PHPM-3F-120-WH). Lutron 3-wire controlled LED drivers (use flourescent3-wire power module: PHPM-3F-DV-WH/PHPM-3F-120-WH). Non-dim (use switching module: PHPM-SW-DV-WH). 010 V (use TVI). Note: A zone may be programmed to control only oneload type at a time. Lightning strike protection meets ANSI/IEEE standard62.41-1980. Can withstand voltage surges of up to6000 V and current surges of up to 3000 A. Tested to withstand 16 kV electrostatic discharge withoutdamage or memory loss. RTISS-equipped: Compensates in real time for incomingline voltage variations (no visible flicker with +/-2%change in RMS voltage per cycle, and +/-2% Hz changein frequency per second). Power failure memory retains programming and light levelsettings for up to 10 years in the event of a power loss. The GRAFIK Eye QS control unit supplies 3 Power DrawUnits (PDUs) on the QS link. Faceplate is hinged at the top and bottom, and staysopen at 180° for ease of access. Scene and Shade Buttons. Large, rounded buttons are easy to use. Backlit buttons with optional engraving make it easy to. Find and to operate the control unit in low light conditions. (backlight can be disabled). Optional button engraving is angled up to the eye for. Predefined label stickers are included for field labeling. 4 preset lighting scenes, plus Off, are accessible from the. Front of the control unit. 12 additional scenes are stored in the control unit and. Are accessible from the integral timeclock, seeTouch QS. Wallstations, and QS interfaces. Light levels fade smoothly between scenes. Can be set differently for each scene: 0 to 59 seconds, or1 to 60 minutes. Maximum fade time from Scene Off is 3 seconds. The item “LUTRON QSGR-6P GRAFIK Eye QS 6-zone Lighting Control System Unit Dimmer 4BCA” is in sale since Friday, October 9, 2020. This item is in the category “Business & Industrial\Facility Maintenance & Safety\Facility Lighting\Other Lights & Lighting”. The seller is “technologyspecialists” and is located in La Quinta, California. This item can be shipped to United States.
  • Brand: Lutron
  • MPN: QSGR-6P