The Following Items Are Included. SKF TMEA 1 Shaft Alignment Tool (BC# 27086-L/T). SKF S measuring Laser w/ Shaft Fixture (BC# 16791M-L/T). SKF M Measuring Laser w/ Shaft Fixture (BC# 16790M-L/T). (2) SKF Locking Chains. (2) SKF Extension Chains. (4) SKF Sets of Shims. Hard Copy User Manual. SKF TMEA 1 Shaft Alignment Tool. Perfect alignment of machinery shafts is crucial to prevent premature bearing failure, shaft fatigue, sealing problems and vibrations. Includes Hard Carrying Case & Accessories As Listed Above! It further reduces the risk of over-heating and excessive energy consumption. The SKF shaft Alignment Tool TMEA 1 offers an easy and accurate way of adjusting two units of rotating machinery so that the shafts of the units are in a straight line. The TMEA 1 uses two measuring units both provided with a laser diode and a positioning detector. As the shafts are rotated through 180° any parallel misalignment or angular misalignment causes the two beams to deflect from their initial relative position. The measurements from the two positioning detectors automatically enter the logic circuitry inside the display unit, which calculates the misalignment of the shafts and advises on corrective alignments of the machine feet. After a straightforward measuring procedure, the tool immediately displays the misalignment of the shafts and the necessary corrective adjustments of the feet of the machine. Since the calculations are done in real time the progress of the alignment can be followed live. 670 – 675 nm (26,4 – 26,6 x 10 in). Maximum distance between measuring units. 1 meter (3 ft). Single-axis PSD, 10 x 10 mm (0,4 x 0,4 in). 1,8m (6 ft). 118 x 101 x 30 mm (4,6 x 4,0 x 1.,2 in). 0,2 kg (0,4 lb). LCD 55 x 77 mm (2,1 x 3,0 in). 3 x 1,5V LR14 Alkaline. 24 hours continuous use. 0,01 mm (0,1 x 10 in). 160 x 140 x 51 mm (6,3 x 5,5 x 2,0 in). 0,5 k (1,1 lb). 50 x 50 mm (2,0 x 2,0 in). Thickness (10 of each). 0,05 0, 10, 0,25 0,50 and 1,00 mm (1,9 3,9 9,8 19,6, 39×10 in). 13 mm (0,5 in). 30 – 500 mm (1,2 – 20 in). Better than 2 % ± 1 digit. 0 – 40 °C (32 – 104 °F). Dimensions (in carrying case). 425 x 330 x 115 mm (16,7 x 13,0 x 4,5 in). 4,3 kg (9,5 lb). Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR’s, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our. Please don’t hesitate to. For a Quote on Something you don’t see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don’t have a listing for a particular item that you are looking for. (Certain orders may take longer for processing due to comprehensive final service inspections). Sell Smarter with Kyozou. Inventory and Ecommerce Management. The item “SKF TMEA 1 Laser Shaft Alignment Tool TMEA1″ is in sale since Wednesday, October 3, 2018. This item is in the category “Business & Industrial\Building Materials & Supplies\Lights & Lighting\Other Lights & Lighting”. The seller is “test_equipment_company_store” and is located in Toledo, Ohio. This item can be shipped worldwide.

• Brand: SKF
• MPN: TMEA 1
• Model: TMEA 1

The Following Items Are Included. SKF TMEA 2 Shaft Alignment Tool (BC# 26968). SKF M Measuring Laser w/ Shaft Fixture (BC# 26969). SKF S Measuring Laser w/ Shaft Fixture (BC# 26970). (2) SKF Locking Chains. (2) SKF Extension Chains. Hard Copy User Manual. This Item Has A Current Calibration! SKF TMEA 2 Shaft Alignment Tool. The SKF shaft alignment tool TMEA 2 offers an easy and accurate way of adjusting two units of rotating machinery so that the shafts of the units are in a straight line. Requires no special training to operate. Includes Hard Carrying Case & Accessories As Listed Above! The TMEA 2 is an easy-to-use shaft alignment tool, which requires no special training to operate. The two measuring units can be easily attached to the shafts using magnetic breaks or chains. Each measuring unit emits a laser line, which is projected on the detector of the other unit. The TMEA 2 consists of two measuring units and a display unit. The measuring units are fitted with magnetic brackets for attachment to the shafts, but can also be attached using chains. Both measuring units emit a laser line, which is projected on the position sensor detector and a line scale on the other unit. The measuring units are also equipped with spirit levels, which allows easy positioning in the 9, 12 and 3 o’clock positions. The display unit is operated using just 5 buttons, including the on/off button and provides clear “real-time” of both coupling and feet values during the alignment process. After measuring shaft misalignment, alignment is easily performed by adjusting the moveable machine(s). Perfect alignment of machinery shafts is crucial to prevent premature bearing failure, shaft fatigue, sealing problems and vibrations. It further reduces the risk of over-heating and excessive energy consumption. Display unit simultaneously provides clear real-time coupling and feet values during alignment process making rechecking of the alignment unnecessary. The laser and scale lines facilitate easy pre-alignment. Soft foot feature is shown on the digital display, which easily guides the operator through this function. Display unit can be held using one hand, freeing the operator to perform the alignment. Magnetic brackets allow easy fixture of the measuring units onto the shaft. A set of blank alignment reports to help you keep record of your alignment jobs. Maximum distance of 0,85 m (2.8 ft) between the measuring units brackets. 670 – 675 nm. Maximum distance between measuring units brackets. 850 mm (2.8 ft). Minimum distance between measuring units brackets. 70 mm (2.7 in). Single axis PSD, 8.5 x 0.9 mm 0.3 x. 1,6 m (5.2 ft). 87 x 79 x 39 mm (3.4 x 3.1 x 1.5 in). 210 gram (7.3 oz). LCD 35 x 48 mm (1.4 x 1.9 in). 2 x 1,5V LR14 Alkaline. 20 hours continuous operation. 0,01 mm (0.1 mil for’inch’ setting). 230 x 81 x 62 mm (9.1 x 3.2 x 2.4 in). 300 g (10.5 oz). 50 x 50 mm (2.0 x 2.0 in). 0.05 – 0.10 – 0.25 – 0.50 – 1.00 mm. 40 – 500 mm (1.6 – 20 in) Magnetic: 40-500 mm (1.6 – 20 in) Chain: 40-150 mm (1.6 – 5.9 in). < 2% / ± 0,01 mm. 0 - 40 °C (32 - 104 °F). 390 x 340 x 95 mm (15.4 x 13.4 x 3.7 in). 3.7 kg (8.1 lb). Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our. Please don't hesitate to. For a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. (Certain orders may take longer for processing due to comprehensive final service inspections). Sell Smarter with Kyozou. Inventory and Ecommerce Management. The item "SKF TMEA 2 Laser Shaft Alignment Tool TMEA2" is in sale since Wednesday, December 27, 2017. This item is in the category "Business & Industrial\Building Materials & Supplies\Lights & Lighting\Other Lights & Lighting". The seller is "test_equipment_company_store" and is located in Toledo, Ohio. This item can be shipped worldwide.

• Brand: SKF
• MPN: TMEA 2
• Model: TMEA 2

The Following Items Are Included. SKF TMEA 1 Shaft Alignment Tool (BC# 27086). SKF S measuring Laser w/ Shaft Fixture (BC# 16791M). SKF M Measuring Laser w/ Shaft Fixture (BC# 16790M). (2) SKF Locking Chains. (2) SKF Extension Chains. (4) SKF Sets of Shims. Hard Copy User Manual. This Item Has A Current Calibration! SKF TMEA 1 Shaft Alignment Tool. Perfect alignment of machinery shafts is crucial to prevent premature bearing failure, shaft fatigue, sealing problems and vibrations. Includes Hard Carrying Case & Accessories As Listed Above! It further reduces the risk of over-heating and excessive energy consumption. The SKF shaft Alignment Tool TMEA 1 offers an easy and accurate way of adjusting two units of rotating machinery so that the shafts of the units are in a straight line. The TMEA 1 uses two measuring units both provided with a laser diode and a positioning detector. As the shafts are rotated through 180° any parallel misalignment or angular misalignment causes the two beams to deflect from their initial relative position. The measurements from the two positioning detectors automatically enter the logic circuitry inside the display unit, which calculates the misalignment of the shafts and advises on corrective alignments of the machine feet. After a straightforward measuring procedure, the tool immediately displays the misalignment of the shafts and the necessary corrective adjustments of the feet of the machine. Since the calculations are done in real time the progress of the alignment can be followed live. 670 – 675 nm (26,4 – 26,6 x 10 in). Maximum distance between measuring units. 1 meter (3 ft). Single-axis PSD, 10 x 10 mm (0,4 x 0,4 in). 1,8m (6 ft). 118 x 101 x 30 mm (4,6 x 4,0 x 1.,2 in). 0,2 kg (0,4 lb). LCD 55 x 77 mm (2,1 x 3,0 in). 3 x 1,5V LR14 Alkaline. 24 hours continuous use. 0,01 mm (0,1 x 10 in). 160 x 140 x 51 mm (6,3 x 5,5 x 2,0 in). 0,5 k (1,1 lb). 50 x 50 mm (2,0 x 2,0 in). Thickness (10 of each). 0,05 0, 10, 0,25 0,50 and 1,00 mm (1,9 3,9 9,8 19,6, 39×10 in). 13 mm (0,5 in). 30 – 500 mm (1,2 – 20 in). Better than 2 % ± 1 digit. 0 – 40 °C (32 – 104 °F). Dimensions (in carrying case). 425 x 330 x 115 mm (16,7 x 13,0 x 4,5 in). 4,3 kg (9,5 lb). Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR’s, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our. Please don’t hesitate to. For a Quote on Something you don’t see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don’t have a listing for a particular item that you are looking for. (Certain orders may take longer for processing due to comprehensive final service inspections). Sell Smarter with Kyozou. Inventory and Ecommerce Management. The item “SKF TMEA 1 Laser Shaft Alignment Tool TMEA1″ is in sale since Monday, February 19, 2018. This item is in the category “Business & Industrial\Building Materials & Supplies\Lights & Lighting\Other Lights & Lighting”. The seller is “test_equipment_company_store” and is located in Toledo, Ohio. This item can be shipped worldwide.

• Brand: SKF
• MPN: TMEA 1
• Model: TMEA 1